A written technical specification for 105–660 kVA canopy sets: we analysed the requirements and selected TRX QZ TA 0105 (Quartz Q4105AZLD, 105 kVA standby / 94.5 kVA prime) with 1 alternative configuration, answered 3 points in a compliance table and prepared the documents listed below.
65–640 (5 PRP ranges: 65–99 ×90, 100–199 ×60, 200–350 ×60, 351–599 ×60, 600–640 ×10) kVA prime
Site conditions
Min -30 °C
Fuel tank and autonomy
Autonomy at 75 % load by power range: 20 / 10 / 9 / 8 / 7 h
Other requirements
Max weight per range (1.8 t / 3.5 t / 6 t / 12 t / 25 t); Overall dimensions within 6.1 × 2.5 × 2.99 m; Engine block heater for –30 °C; Base tank sized for required runtime; EU funding labels; Test run and fluid drain before delivery; Partial deliveries accepted
Emission
EU Stage II
Our work
Requirement analysis · Model selection and sizing
Each PRP range mapped to one model by prime rating
Required runtime at 75% load checked against base-tank capacity
Canopy dimensions checked against overall size limit
Stage II engines selected
Point-by-point compliance table
Item
Required
Our proposal
Assessment
Operation down to –30 °C
–
Engine block heater
With option
Runtime at 75% load
–
Enlarged spill-contained base tank
With option
EU funding labels, test run with fluid drain
–
Quoted on configuration confirmation
With option
Options identified and priced
Engine block heater
Enlarged base-frame fuel tank
EU funding labels
Test run with fluid drain
Truck transport per batch
Documents prepared · Offer package
Commercial offer (line-item structure; prices not published here)
Values are taken from the model’s datasheet; the full datasheet and catalogue page are on the model page.
Offered configuration
Controller: Deep Sea DSE
105/94.5, 155/139.5, 260/236, 440/400, 660/600 kVA standby/PRP
50 Hz 400/230 V 1500 rpm
Electronic governor
Stage II liquid-cooled engines
Base-frame fuel tank
4-pole main circuit breaker
Alternative configurations
TRX SD TA 0300 – SDEC SC9D340D2, 300 kVA standby / 273 kVA prime
Packing, shipping and export documents
Transport: road transport by truck.
Canopy sets are stretch-wrapped with edge protection; loose parts travel in crates or on pallets.
Export documents: commercial invoice, packing list, certificate of origin, A.TR movement certificate for EU customs clearance, factory test report.
Customer, tender and site names are withheld; only the country is shown. Prices and commercial terms are not published. Customer documents are not shared; requirements are summarised in our own words.
How we work with your specification
Send the specification, datasheet form or list of needs (PDF, Excel, Word or a message).
We reply on the same working day and ask about missing or unclear points.
We size the power (prime/standby), voltage, frequency, ambient conditions and autonomy, select the model and prepare a point-by-point compliance table. Deviations and options are stated openly.
We send the package — offer, datasheet, catalogue pages and any forms requested; for standard configurations within 24 hours.
