Tunisia – Hospital standby power: 900 kVA canopy set
A request (hospital standby power) for 900 kVA canopy set: we analysed the requirements and selected TRX SD TA 1010 (SDEC SC33W1150D2, 1,010 kVA standby / 918 kVA prime), answered 3 points in a compliance table and prepared the documents listed below.
- Country
- Tunisia
- Application
- Hospital standby power
- Power
- 1,010 kVA standby / 918 kVA prime · 50 Hz
- Quantity
- 1 set
- Source of requirements
- Requirements sent by message or e-mail
Request a quote
Contact us directly
Call +90 216 634 34 06WhatsApp +90 533 582 26 50
We reply in English.
The request
| Rating | 900 kVA |
|---|---|
| Fuel tank and autonomy | 8 h autonomy |
Our work
Requirement analysis · Model selection and sizing
- ≥900 kVA required → selected 918 kVA prime / 1010 kVA standby model
- 8 h autonomy checked: 2,100 L tank ≈13 h at full load
- ATS 1600 A sized for the set
Point-by-point compliance table
| Item | Required | Our proposal | Assessment |
|---|---|---|---|
| Power | 900 kVA | 1,010 kVA standby / 918 kVA prime | Complies |
| 8 h autonomy | – | 2,100 L integrated tank | Complies |
| External storage tank and feed pump | – | Not included; can be quoted on request | Buyer / local scope |
Options identified and priced
- External storage tank
- Fuel feed pump
Documents prepared · Offer package
- Commercial offer (line-item structure; prices not published here)
- Catalogue pages
- Factory load-test report (sample)
- Warranty terms document
- Start-up and handover form
- Maintenance and service forms
- Operating and maintenance manual
- Alternator datasheet
- Engine datasheet
- Offer package 21 pages in French with full datasheet, type test report and service documents
Proposed solution
TRX SD TA 1010
| Standby power | 1,010 kVA / 808 kW |
|---|---|
| Prime power | 918 kVA / 734.4 kW |
| Voltage · Frequency · Speed | 230/400 V · 50 Hz · 1,500 rpm |
| Engine | SDEC SC33W1150D2 · 32.8 L |
| Alternator | Terex TA400-700N · AVR MX341B · IP23/H |
| Fuel consumption · At 75% load | 146.3 L/h |
| Fuel consumption · At 100% load | 193.5 L/h |
| Fuel tank (Canopied (soundproof)) | 2,100 L |
| Dimensions (L × W × H) (Canopied (soundproof)) | 4,900 × 2,500 × 3,500 mm · 10,350 kg |
| Dimensions (L × W × H) (Open type) | 4,900 × 2,500 × 3,200 mm · 9,500 kg |
Values are taken from the model’s datasheet; the full datasheet and catalogue page are on the model page.
Offered configuration
- Controller: Deep Sea DSE
- 6 cylinders, turbocharged, electronic governor, 24 V
- Brushless alternator class H IP23
- 2,100 L integrated tank (approx. 13 h at full load)
- Factory test report supplied
Packing, shipping and export documents
- Canopy sets are stretch-wrapped with edge protection; loose parts travel in crates or on pallets.
- Export documents: commercial invoice, packing list, certificate of origin, factory test report.
Customer, tender and site names are withheld; only the country is shown. Prices and commercial terms are not published. Customer documents are not shared; requirements are summarised in our own words.
How we work with your specification
- Send the specification, datasheet form or list of needs (PDF, Excel, Word or a message).
- We reply on the same working day and ask about missing or unclear points.
- We size the power (prime/standby), voltage, frequency, ambient conditions and autonomy, select the model and prepare a point-by-point compliance table. Deviations and options are stated openly.
- We send the package — offer, datasheet, catalogue pages and any forms requested; for standard configurations within 24 hours.