Generator Sets with SDEC Engines

TRX SD TA 0400 – 400 kVA SDEC Diesel Generator

Generator set datasheet (PDF)
400 kVA SDEC Diesel Generator – TRX SD TA 0400 (Canopy)400 kVA SDEC Diesel Generator – TRX SD TA 0400 (Open type)
Representative image; enclosure and equipment may vary by model.
Standby power400 kVA320 kW
Prime power365 kVA292 kW
Get price and lead timeGet priceTRX SD TA 0400 Catalogue+90 216 634 34 06
  • Factory-direct sales
  • Delivery from stock available

Service request

Engine
SDEC SC15G500D2
Alternator
Terex TA315-300N375 kVA · 400 V / 50 Hz · HAlternator datasheet (PDF)
Frequency
50 Hz
Voltage
230/400 V
Warranty
12 months or 1,000 operating hoursTerms for sales outside Türkiye.

TRX SD TA 0400 is a diesel generator set with 230/400 V / 50 Hz output. Standby power is 400 kVA (320 kW) and prime power is 365 kVA (292 kW). It uses a SDEC SC15G500D2 engine (6 cylinders, 14.16 L) and a Terex TA315-300N alternator. Fuel consumption at 75% load is 59.8 L/h according to manufacturer data.

Summary

TRX SD TA 0400 is a diesel generator set rated 400 kVA standby and 365 kVA prime (320 kW / 292 kW). It uses a SDEC SC15G500D2 engine and a Terex TA315-300N alternator, with 230/400 V / 50 Hz output. The set is built at our factory in İstanbul, full-load tested before shipment and supplied with a canopy or as an open set.

Key technical data

Standby power400 kVA / 320 kW
Prime power365 kVA / 292 kW
EngineSDEC SC15G500D2
AlternatorTerex TA315-300N
Voltage230/400 V
Frequency50 Hz
Speed1,500 rpm
Fuel consumption (75% load)59.8 L/h
Fuel consumption (100% load)81.2 L/h

Prime and standby ratings

Prime power (365 kVA) is the power the set can supply continuously at variable load with no limit on running hours; it is the basis for sites with no grid or an unreliable grid. Standby power (400 kVA) is the maximum power for backup use during a mains failure, for a limited number of hours per year, with no overload allowance. A load that will run continuously should be sized on the prime rating.

Standby, prime and continuous power explained

Typical applications

Factories and production plants; large buildings such as hospitals and shopping centres; data rooms; large construction and mining sites. For correct sizing, send your load list with your quote request.

Engine and alternator options

Models of similar power built with other engine brands:

Production and delivery

The set is built at our factory in İstanbul, where the engine, alternator, base frame, canopy and control panel are assembled, and it is full-load tested before shipment. For export sales the delivery term is EXW İstanbul (Incoterms 2020). The lead time is stated in writing in the quotation, according to the order scope.

Warranty

For sales outside Türkiye the warranty is 12 months or 1,000 operating hours.

Request a quote for this modelAsk on WhatsApp

Frequently asked questions

How many kW does the TRX SD TA 0400 deliver?

The TRX SD TA 0400 delivers 320 kW (400 kVA) standby and 292 kW (365 kVA) prime. These are catalogue values at 0.8 power factor and 50 Hz.

Which engine and alternator does the TRX SD TA 0400 use?

The standard configuration uses a SDEC SC15G500D2 engine and a Terex TA315-300N alternator. If you need another engine brand, we build other models of similar power.

What is the fuel consumption of the TRX SD TA 0400?

According to catalogue data, fuel consumption is 59.8 L/h at 75% load and 81.2 L/h at 100% load. Actual consumption depends on the load profile and operating conditions.

Can the TRX SD TA 0400 be built for 60 Hz?

This model can also be built for 60 Hz. 60 Hz ratings depend on the engine, alternator and required voltage (e.g. 480/277 V, 440/254 V, 380/220 V); we quote with project-specific technical data.

What warranty applies to the TRX SD TA 0400?

For sales outside Türkiye the warranty is 12 months or 1,000 operating hours.

How do I get a quote for the TRX SD TA 0400?

Fill in the quote form or send the model code on WhatsApp. The quotation is prepared with the delivery country, voltage and frequency, canopy or open-type preference and ATS requirement.

General specifications

Standby power400 kVA / 320 kW
Prime power365 kVA / 292 kW
Voltage230/400 V
Frequency50 Hz
Speed1,500 rpm
Power factor (cos φ)0.8

Engine

MakeSDEC
ModelSC15G500D2
EmissionStage II
Number of cylinders6
Bore × stroke136 × 165 mm
Displacement14.16 L
AspirationTurbocharged, air-to-air aftercooled
Fuel injectionDirect injection
Compression ratio15.55:1
CoolingWater-cooled
GovernorElectronic
Oil capacity41 L
Coolant capacity75.5 L

Alternator

MakeTerex
ModelTA315-300N
Rated output (400 V / 50 Hz, Class H, continuous)375 kVA
Alternator standby rating412.5 kVA
Alternator prime rating375 kVA
Voltage230/400 V
Power factor (cos φ)0.8
Number of leads12
Winding pitch2/3
Protection / insulation classIP23/H
ExcitationSelf-excited
AVR modelAS440
Voltage regulation± 1 %
Efficiency93.5 %

Fuel consumption (L/h)

At standby power81.2 L/h
At 100% load81.2 L/h
At 75% load59.8 L/h
At 50% load41.12 L/h

Dimensions and weight

Open type

Dimensions (L × W × H)3150 × 1400 × 2400 mm
Weight3,093 kg
Fuel tank846 L

Canopied (soundproof)

Dimensions (L × W × H)3750 × 1400 × 2646 mm
Weight3,593 kg
Fuel tank846 L

Values are for 50 Hz, 230/400 V. For technical data not listed here, see the model catalogue or ask us.

Standard and optional equipment

Standard equipment

  • Digital control panel (engine protection & monitoring)
  • Automatic voltage regulator (AVR)
  • Battery, battery cables and battery charger
  • Industrial-type exhaust silencer
  • Base-frame fuel tank
  • Emergency stop button
  • Anti-vibration mounts
  • Factory load test report
  • Operation and maintenance manual

Optional equipment

  • Automatic transfer switch (ATS)
  • Synchronisation panel (parallel operation)
  • Additional / enlarged fuel tank
  • Silent-type canopy (sound insulated)
  • Trailer chassis
  • Container-type enclosure
  • Remote monitoring module (GSM / IoT)
  • Cold climate package (block heater)
  • Custom colour / corporate identity finish

Standard control panel: Datakom DKG-309. Other controllers are available as options on request (Generator Controllers).

The ATS panel is a separate option, supplied with the set on customer request.

Standard and optional content may vary by model and series.

Request a quote

Your request has been received. We will contact you as soon as possible.

Could not send. Please try again or call us. You can also reach us directly: WhatsApp +90 533 582 26 50 · info@terexdiesel.com

Too many submissions in a short time. Please try again in a few minutes.

Phone or email (one is enough)

What does your quotation include?

  • Model and configuration The selected model and its configuration: open type or canopy.
  • Standard equipment and control panel The standard equipment list and control panel: Datakom DKG-309 on sets below 500 kVA, Datakom D-500 on sets of 500 kVA and above. Standard control panel (TRX SD TA 0400): Datakom DKG-309.
  • ATS The ATS panel is a separate option, supplied with the set on customer request.
  • Transport EXW İstanbul; freight quoted separately on request.
  • Warranty 12 months or 1,000 operating hours.
  • Delivery time Stated in writing in the quotation.
  • Payment and delivery terms for export (Incoterms) Agreed in writing at the quotation stage.
Chat on WhatsApp

Download