Romania – 25–110 kVA canopy sets
A request for 25–110 kVA canopy sets: we analysed the requirements and selected TRX BD TA 0025 (Baudouin 4M06G4D0/S, 25 kVA standby / 23 kVA prime) with 4 alternative configurations, answered 5 points in a compliance table and prepared the documents listed below.
- Country
- Romania
- Power
- 25 kVA standby / 23 kVA prime · 50 Hz
- Quantity
- Series supply (many sets)
- Source of requirements
- Requirements sent by message or e-mail
Request a quote
Contact us directly
Call +90 216 634 34 06WhatsApp +90 533 582 26 50
We reply in English.
The request
| Rating | 3×25, 2×40, 3×60, 2×100 kVA |
|---|---|
| Enclosure | Sound-attenuated canopy |
| Automatic transfer switch | Yes |
| Engine brand | Baudouin (prime) / Yangdong (backup) |
Our work
Requirement analysis · Model selection and sizing
- Four sizes mapped for prime (Baudouin) and backup (Yangdong) use
- ATS as separate lines
Point-by-point compliance table
| Item | Required | Our proposal | Assessment |
|---|---|---|---|
| Engine brand | Baudouin (prime) / Yangdong (backup) | Baudouin 4M06G4D0/S | Complies |
| Enclosure | Sound-attenuated canopy | Canopy, 1950 × 900 × 1337 mm | Complies |
| Installation protection (leakage protection, breaker, transfer system) | – | Customer installation responsibility per offer | Buyer / local scope |
| Engine oil, antifreeze, anti-vibration mounts | – | Included | Complies |
| Customs clearance and local taxes | – | – | Buyer / local scope |
Documents prepared · Offer package
- Commercial offer (line-item structure; prices not published here)
- Catalogue pages
- Factory load-test report (sample)
- Two packages: Baudouin and Yangdong
Proposed solution
TRX BD TA 0025
| Standby power | 25 kVA / 20 kW |
|---|---|
| Prime power | 23 kVA / 18.4 kW |
| Voltage · Frequency · Speed | 230/400 V · 50 Hz · 1,500 rpm |
| Engine | Baudouin 4M06G4D0/S · 2.3 L |
| Alternator | Terex TA180-24N2 · AVR SX460 · IP23/H |
| Fuel consumption · At 75% load | 4.5 L/h |
| Fuel consumption · At 100% load | 6.1 L/h |
| Fuel tank (Canopied (soundproof)) | 82 L |
| Dimensions (L × W × H) (Canopied (soundproof)) | 1,950 × 900 × 1,337 mm · 689 kg |
| Dimensions (L × W × H) (Open type) | 1,600 × 900 × 1,215 mm · 518 kg |
TRX BD TA 0044
| Standby power | 44 kVA / 35.2 kW |
|---|---|
| Prime power | 40 kVA / 32 kW |
| Voltage · Frequency · Speed | 230/400 V · 50 Hz · 1,500 rpm |
| Engine | Baudouin 4M06G8D0/S · 2.3 L |
| Alternator | Terex TA180-34N2 · AVR SX460 · IP23/H |
| Fuel consumption · At 75% load | 7 L/h |
| Fuel consumption · At 100% load | 9.5 L/h |
| Fuel tank (Canopied (soundproof)) | 101 L |
| Dimensions (L × W × H) (Canopied (soundproof)) | 2,300 × 1,000 × 1,545 mm · 870 kg |
| Dimensions (L × W × H) (Open type) | 1,900 × 1,000 × 1,215 mm · 600 kg |
TRX BD TA 0072
| Standby power | 72 kVA / 57.6 kW |
|---|---|
| Prime power | 65 kVA / 52 kW |
| Voltage · Frequency · Speed | 230/400 V · 50 Hz · 1,500 rpm |
| Engine | Baudouin 4M10G2D0/S · 4.087 L |
| Alternator | Terex TA180-40N2 · AVR SX460 · IP23/H |
| Fuel consumption · At 75% load | 11 L/h |
| Fuel consumption · At 100% load | 15 L/h |
| Fuel tank (Canopied (soundproof)) | 139 L |
| Dimensions (L × W × H) (Canopied (soundproof)) | 2,600 × 1,000 × 1,570 mm · 1,119 kg |
| Dimensions (L × W × H) (Open type) | 2,200 × 1,000 × 1,476 mm · 894 kg |
TRX BD TA 0110
| Standby power | 110 kVA / 88 kW |
|---|---|
| Prime power | 100 kVA / 80 kW |
| Voltage · Frequency · Speed | 230/400 V · 50 Hz · 1,500 rpm |
| Engine | Baudouin 4M10G6D0/S · 4.087 L |
| Alternator | Terex TA225-80N · AVR SX460 · IP23/H |
| Fuel consumption · At 75% load | 16 L/h |
| Fuel consumption · At 100% load | 21.3 L/h |
| Fuel tank (Canopied (soundproof)) | 139 L |
| Dimensions (L × W × H) (Canopied (soundproof)) | 2,600 × 1,000 × 1,570 mm · 1,350 kg |
| Dimensions (L × W × H) (Open type) | 2,200 × 1,000 × 1,476 mm · 1,130 kg |
Values are taken from the model’s datasheet; the full datasheet and catalogue page are on the model page.
Offered configuration
- Controller: Deep Sea DSE
- 25/23, 44/40, 72/65, 110/100 kVA standby/prime
- ATS as separate lines
Alternative configurations
- TRX YD TA 0025 – Yangdong YSD490D, 25 kVA standby / 22 kVA prime
- TRX YD TA 0044 – Yangdong Y4105D, 44 kVA standby / 40 kVA prime
- TRX YD TA 0075 – Yangdong YD4EZLD, 75 kVA standby / 68 kVA prime
- TRX YD TA 0100 – Yangdong Y4110ZLDA, 100 kVA standby / 87 kVA prime
Packing, shipping and export documents
- Transport: road transport by truck.
- Canopy sets are stretch-wrapped with edge protection; loose parts travel in crates or on pallets.
- Export documents: commercial invoice, packing list, certificate of origin, A.TR movement certificate for EU customs clearance, factory test report.
Customer, tender and site names are withheld; only the country is shown. Prices and commercial terms are not published. Customer documents are not shared; requirements are summarised in our own words.
How we work with your specification
- Send the specification, datasheet form or list of needs (PDF, Excel, Word or a message).
- We reply on the same working day and ask about missing or unclear points.
- We size the power (prime/standby), voltage, frequency, ambient conditions and autonomy, select the model and prepare a point-by-point compliance table. Deviations and options are stated openly.
- We send the package — offer, datasheet, catalogue pages and any forms requested; for standard configurations within 24 hours.